Fire Pit Hexagon Shark Fish and Coral Reef
These Designs will need Welding or Bending then Welding, (Ask for any size you need)
Fire Pit Hexagon with Shark Fish and Coral Reef for outdoor fireplace illustrated in decorative view with variable sizes options and delivered in dxf files cut ready for cnc machines. All our dxf designs are ready for most CNC cutting machine and designed to be cut for plasma and laser cutters and can be scaled for any other CNC machine such as water jet cutters to any size to fit your design needs.
Available Sizes and Descriptions:
1- 36x42 inch (0.9x1 m) Separated pieces (Will need just Welding):
One file for CNC table not less than 63x60 inch (1.6x1.5 m).
2- 36x42 inch (0.9x1 m) Linked pieces (Will need Bending then Welding):
One file for CNC table not less than 88x48 inch (2.2x1.2 m).
It is magic elements of your outdoor fireplaces and gardens home decor. These are good clean dxf files, No surprises with extra cuts or too many nodes leaving you with a rough cut. These will cut clean.
Resizable DXF files:
These dxf designs can be scaled down to be smaller, but this is limited according to your machine type and your cutting beam width. All our designs are designed considering the minimum cutting beam width is 0.0625" (1.6 mm). If you need help or you facing problems to scale the dxf files feel free to contact us and leave your comment, we are glad to help you.
All our files will be accessible for downloading once you finish the payment. Only the custom design requests, or the custom changes will be delivered after finishing the requesting design.
Contain Open Loop:
if your machine or your software accept only closed lines (closed loops) these dxf designs contains open lines (open loops), please contact us to see the ability of exporting files with closed loops for you.
Share this Product
More from this collection
QUESTIONS & ANSWERSAsk a Question
All I have is a 2' by 2' plasma table can this be cut on it
Hello Kenny, for your machine size you can use the separated design and we will handle it for you to be about 2 or 3 files to be cut. Please not that for the separated designs you will need to weld the panels.