Fire Pit Hexagon Trees and Juice Bottles
These Designs will need Welding or Bending then Welding
Fire Pit Hexagon with arts Trees and Juice Bottles for outdoor fireplace illustrated in decorative view with variable sizes options and delivered in dxf files cut ready for cnc machines. All our dxf designs are ready for most CNC cutting machine and designed to be cut for plasma and laser cutters and can be scaled for any other CNC machine such as water jet cutters to any size to fit your design needs.
Available Sizes and Descriptions:
1- 24x28 inch (0.6x0.7 m) Separated pieces (Will need just Welding):
One file for CNC table not less than 42x40 inch (1x1 m).
2- 36x42 inch (0.9x1 m) Separated pieces (Will need just Welding):
One file for CNC table not less than 63x60 inch (1.6x1.5 m).
3- 24x28 inch (0.6x0.7 m) Linked pieces (Will need Bending then Welding):
One file for CNC table not less than 59x32 inch (1.5x0.8 m).
4- 36x42 inch (0.9x1 m) Linked pieces (Will need Bending then Welding):
One file for CNC table not less than 88x48 inch (2.2x1.2 m).
It is magic elements of your outdoor fireplaces and gardens home decor. These are good clean dxf files, No surprises with extra cuts or too many nodes leaving you with a rough cut. These will cut clean.
Resizable DXF files:
These dxf designs can be scaled down to be smaller, but this is limited according to your machine type and your cutting beam width. All our designs are designed considering the minimum cutting beam width is 0.0625" (1.6 mm). If you need help or you facing problems to scale the dxf files feel free to contact us and leave your comment, we are glad to help you.
All our files will be accessible for downloading once you finish the payment. Only the custom design requests, or the custom changes will be delivered after finishing the requesting design.
Contain Open Loop:
if your machine or your software accept only closed lines (closed loops) these dxf designs contains open lines (open loops), please contact us to see the ability of exporting files with closed loops for you.
Share this Product
More from this collection
QUESTIONS & ANSWERSAsk a Question
What is the first option separated a d linked you get both
Hello Menno, for separated option you will get the design of the fire pit as separated panels and you will need to weld them one by one, For the linked option you will get the design as one linked design contains all the panel in one cut and for this one you will need to bend the panels from the dashed lines and then you weld each contact points. For both options you will get both the above files.
I would like to be able to cut this out of 47" x 47" sheet of 12 g
Hello AJ, for the table size you have you can cut the separated files only, the separated files with the size of 24x28 inch is ready for this design to be cut with your table size, if you need the fire pit with size of 36x42 inch we can separate the design at more than one file and will be work with your table size. You cant cut the linked design with your table as it will need to be scaled down and will be a very small fire pit. Feel free to contact us anytime.
Hello, I bought the fire pit ball design. Is it possible to get the 3D cad file in the picture? Thank you
Hello, the 3D cad file is for showing the final products only and not ready for any machine.