These Designs will need Welding or Bending then Welding
Fire Pit Ball Juice Bottle and Glass with flames for outdoor fireplace delivered in dxf files cut ready for cnc machines with variable sizes options. All our dxf designs are ready for most CNC cutting machine and designed to be cut for plasma and laser cutters and can be scaled for any other CNC machine such as water jet cutters to any size to fit your design needs.
Available Balls Sizes and Descriptions:
1- 24 inch (0.61 m) Separated pieces (Will need just Welding):
One file for CNC table not less than 48x39 inch (1.2x1 m).
2- 24 inch (0.61 m) Linked pieces (Will need Bending and Welding):
One file for CNC table not less than 48x82 inch (1.2x2 m).
3- 36 inch (914 mm) Separated pieces (Will need just Welding):
One file for CNC table not less than 72x58 inch (2x1.5 m).
4- 36 inch (914 mm) Linked pieces (Will need Bending and Welding):
Three files (2 for Ball and Base) for CNC table not less than 113x71 inch (3x1.8 m).
It is magic elements of your outdoor fireplaces and gardens home decor. These are good clean dxf files, No surprises with extra cuts or too many nodes leaving you with a rough cut. These will cut clean.
Resizable DXF files:
These dxf designs can be scaled down to be smaller, but this is limited according to your machine type and your cutting beam width. All our designs are designed considering the minimum cutting beam width is 0.0625" (1.6 mm). If you need help or you facing problems to scale the dxf files feel free to contact us and leave your comment, we are glad to help you.
All our files will be accessible for downloading once you finish the payment. Only the custom design requests, or the custom changes will be delivered after finishing the requesting design.
Contain Open Loop:
if your machine or your software accept only closed lines (closed loops) these dxf designs contains open lines (open loops), please contact us to see the ability of exporting files with closed loops for you.
More from this collection
Questions & AnswersAsk a Question
I subscribed to get the 50% coupon, it appeared on my screen but I assumed it would go to my email as well. I didn't write it down. Could you send it to me? My subscription email is email@example.com
The discount code that give you 50% at your first order is 50ORDER1ST
you need to subscribed.
Me again, I found the discount code. My question now is: I have a 4'x4' PlasmaCAM table. Is the 24" Ball still too big? I see one of the dimensions is 82" for the linked. I'm not a great welder so the linked is what I need. Will this design fit on the table at an angle or will it just not work for me?
Hello Todd, as your table is 48"x48" the only design that works for you is the 24" separated one and you will need to weld it after cutting, I'm sorry for that and I will be happy to help you anytime. Tell me if you need to resize it or make it separated for 2 or 3 pieces, and you will just weld that 2 or 3 pieces.