These Designs will need Welding or Bending then Welding
Fire Pit Balls Eagle Attack flames for outdoor fireplace delivered in dxf files cut ready for cnc machines with variable sizes options. All our dxf designs are ready for most CNC cutting machine and designed to be cut for plasma and laser cutters and can be scaled for any other CNC machine such as water jet cutters to any size to fit your design needs.
Available Balls Sizes and Descriptions:
1- 24 inch (0.61 m) Separated pieces (Will need just Welding):
One file for CNC table not less than 48x39 inch (1.2x1 m).
2- 24 inch (0.61 m) Linked pieces (Will need Bending and Welding):
One file for CNC table not less than 48x82 inch (1.2x2 m).
3- 36 inch (914 mm) Separated pieces (Will need just Welding):
One file for CNC table not less than 72x58 inch (2x1.5 m).
4- 36 inch (914 mm) Linked pieces (Will need Bending and Welding):
Three files (2 for Ball and Base) for CNC table not less than 113x71 inch (3x1.8 m).
It is magic elements of your outdoor fireplaces and gardens home decor. These are good clean dxf files, No surprises with extra cuts or too many nodes leaving you with a rough cut. These will cut clean.
Resizable DXF files:
These dxf designs can be scaled down to be smaller, but this is limited according to your machine type and your cutting beam width. All our designs are designed considering the minimum cutting beam width is 0.0625" (1.6 mm). If you need help or you facing problems to scale the dxf files feel free to contact us and leave your comment, we are glad to help you.
All our files will be accessible for downloading once you finish the payment. Only the custom design requests, or the custom changes will be delivered after finishing the requesting design.
Contain Open Loop:
if your machine or your software accept only closed lines (closed loops) these dxf designs contains open lines (open loops), please contact us to see the ability of exporting files with closed loops for you.
More from this collection
QUESTIONS & ANSWERSAsk a Question
I.am confused on you site that is.on facebook. Seperated.or.link, i only have a 4x4 plasma cam, can i use this? Can my.own drawings be imported? What exactly does the 59.00 cover.all the free stuff etc, what.prigram would.i.need to imporf this into. thank you i wiuld luke.to order tiday.
Hello, we are sorry for the late, for some reason we cant see your message and hope you contact us at Admin@dxfforcnc.com
the 59.9 will cover all the files separated and linked, and for your size you can use the 24" fire pit , the 36" will need large size cnc table, you can use our free dxf files to check if its work with your machine.